First, lightly mist the brick with water from a spray bottle. Apply the whitewash with a wide paint brush, then lightly dab with a cotton cloth as you go. Be sure to whitewash any drips you may leave. Use a Brick Cleaning Solution. For smaller walls and other features, you can handle things quite well.

The humble exterior brick wall is one of those features which can make or break the look of a home.

Over time the bricks will begin to fade, however, and start to look less than great.

Fortunately, you can give them a new life if that’s your desire. It just takes some elbow grease and a bit of know-how.

Let’s dive in and we’ll help you bring new life into your old wall and leave it looking fantastic.

1.) Use a Brick Cleaning Solution

For smaller walls and other features, you can handle things quite well yourself. Neo geo bios for retropie.

Combine salt and soap, along with a scrub brush, in order to make the seemingly impossible happen. All you’ll need to do is wet the wall and combine soap and salt in a 1:1 ratio.

You can then apply the solution to the wall and hit it with a scrub brush five to ten minutes later. It’ll remove the majority of dust and light stains with ease.

2.) Use Vinegar for the Mortar

The white build-up which occurs in the mortar of bricks which have been exposed to inclement weather is actually comprised of salt and calcium build-up. It tends to happen the most in areas with hard water but it will occur pretty much anywhere sooner or later.

Mix 1 part white vinegar with 5 parts water in a spray bottle. Spray it down and then hit it with a scrub brush.

Use a baking soda or dilute ammonia solution to neutralize the vinegar afterward.

Paint Brush For Brick Wallpaper

3.) Pressure Washing an Exterior Brick Wall

Pressure washers let you get things done without having to worry about harsh chemicals. Whether you choose to hire a professional or rent one for your own use is up to you.

This is probably the easiest method for the majority of people and it will handle any build-up on the surface of the bricks or the mortar.

4.) Use Detergent for Deep Stains

Deep staining can be hard to remove using the previous methods. Many people swear by using dish detergent, which can penetrate the surface of the bricks and remove deeper stains.

Since it’s less caustic than most solutions it’ll require more effort on your part in order to get it out but in the end, it will be well worth it.

It’s best to check again after you’ve gone over the whole affair the first time.

5.) The Final Stain Solution

Brick Paint App

The final solution for handling stains is going to be harsher chemicals. Many people swear by boric acid or Drano crystals.

If you’ve tried everything else first then you may want to give it a shot. Just make sure to use proper protective gear such as goggles and long gloves and to neutralize the solution once you’re done.

Bringing New Life to Old Brick

You don’t have to let your exterior brick wall look dingy and dusty. Whether it’s the exterior of your home or a small feature in the backyard you’ll find the steps to handle it are pretty much the same.

How To Paint Brick

Many people opt to bring in a professional if it’s been quite some time since the bricks were last cleaned.

If you’re looking for more home cleaning tips, then hit our blog and learn what you need to bring your house back to a sparkling condition.

Step Four: Rolling

How To Paint Brick Wall

• Once you’ve finished cutting in, start painting with the roller
• Load the roller. Make sure you have an even cover of paint around the roller sleeve before you begin.
• If your roller doesn’t spin evenly, then the paint is uneven and you need to load up again.
• Start rolling from bottom to top moving from one side of the wall to the other. Never start in the middle.
• Use a roller pole to reach further with each stroke.
• Because of the difference in finish between brush and roller, get as close as you can to where you cut in.
• Load up your roller more often so you don’t have to work as hard.
• Each time you finish a three to four metre section you need to lay off your paint.
• Do this by rolling the roller without loading it up with paint. Then roll from the top of the wall to the bottom in one straight stroke.
• Then continue along the length of the painted wall taking care to slightly overlap so you don’t cause streaks.
• It’s important you maintain a wet edge and complete an entire section of wall before stopping so your finish isn’t patchy.
• If the edge dries, it may create a line in your finish.
• Allow at least two hours drying time before applying a second coat.